OPTIMEL 2002 - High Volume
| Macromelt Moulding processing equipment for mass production |
he OptiMel 2002 shuttle table machine has been developed for the manufacturing medium to high volume production.
The OptiMel 2002 has an integral automatic process control.
The OptiMel 2002 is a one operator workstation with up to 60% higher output than OM2000. It is also possible to integrate the OptiMel 2002 into fully automatic production lines. |
The OptiMel 2002 machine combines a high level in process consistency and control in an operator-friendly workstation.
The production cycle time has been significantly decreased with the addition of the sliding table. Many optional extras can be added to further increase efficiency. |
 |
 |
Tool technology
Tarapath supplies specially custom-built moulds specifically designed for processing Macromelt materials to the Macromelt® Moulding processing equipment. The tool outer dimensions are similar for the complete OptiMel range of machines making them interchangeable between machines. |
The Optimel 2002 package contains:
| • |
Sliding table single station accepts two mould lower parts and one upper mould with pneumatic tool clamping system |
| • |
Touch Panel |
| • |
Automatic process control |
|
- Moulding pressure profile control
- Tool ejectors control |
| • |
Available options |
|
- Tool temperature control
- Pressure monitoring
- Automatic tank filling
|
Download some sample footage of the OM 2002
 OM2002.avi (9MB)
|
|
 |
|
Optimel 2002
|
|
|
Air Pressure
|
0,6 MPa / 6,0 bar
|
|
Injection Pressure
|
0 - 0,4 MPa / 0 - 4 bar
|
| Tool Clamping Force |
470 N / 480 kg |
|
Power Supply
|
3 /N / PE AC 400 V /50 Hz |
|
Power Consumption
|
500 W
|
|
Weight
|
350 kg
|
|
Workstation Dimensions
|
W 1325 mm
H 1650 mm
D 820 mm
|
|
| Enquire about this product... |
|
|
